| The iP Solutions Regulator Module is a high-speed 0-3.0V,
25A regulator board suitable for plugging into ATE load boards close to the
Device Under Test ( DUT). This high-speed regulator responds to di/dt
demands much faster than the typical ATE supply is capable of doing. The
fast response of the regulator allows a significant reduction in the total
value of the decoupling capacitance required to keep the DUT voltage
constant despite large and fast di/dt changes (25A/nsec). This
capacitance value can often be reduced by a factor of 100 or more for a
given DUT di/dt step load change and voltage droop requirement. |
